Ordering opens soon. Until then, write to support@uliketechnology.com and an engineer answers.

PCB fabrication

PCB manufacturing (bare boards)

Soon you upload the Gerber files here, see the board checked against the manufacturing limits, choose the options and order. Our own factory assembles boards; the bare boards are made by board factories we work with, and an engineer of ours confirms every order.

What you can order

The options are those of our catalogue. The capabilities page reads them live, value by value; here they are in words.

  • Layers and thickness

    Single-sided, double-sided and multilayer boards, in a range of board thicknesses.

  • Materials

    FR-4 in several Tg grades, and aluminium, copper core, high-frequency laminates and flexible material.

  • Finishes and colours

    HASL with or without lead, ENIG, OSP and further surface finishes; solder mask in several colours, with white or black silkscreen.

  • Copper and vias

    Outer and inner copper weights; tented, plugged or filled vias; blind and buried vias for dense boards.

  • Special processes

    Impedance control, gold fingers, plated half-holes, edge plating, V-cut and panels.

  • Electrical test

    The electrical test of the bare boards is one of the options.

Which values are priced at once, which an engineer confirms and, where they are published, the manufacturing limits are on the capabilities page. They are not repeated here, so this page cannot go out of date.

Every option, read live from the catalogue

  • Bare green board with gold-coloured pads and dense routing but almost no parts, photographed at an angle on white.
    A bare board from the factory's case pictures
  • Teal panel of many small boards in an array, photographed at an angle on white.
    Small boards delivered as a panel
  • Panel of identical small blue boards in a grid.
    A panel of identical boards

The file check comes before the price

Every upload runs through 25 checks in three levels: is the package complete and readable, can the board be built within the manufacturing limits, and do the files match what you ordered.

A finding names its rule and, where there is one, the way to fix it, and it is marked on the drawing when it has a place on the board. A board with open findings can still go to an engineer, who confirms what can be made and at which price.

The check shows that the files are complete, consistent and buildable by us. It cannot show that the circuit works. An engineer confirms every order before production.

All 25 checks of the file check

Prototypes and larger quantities, the same flow

Type the number of boards and the price follows. The steps are the same for a handful of boards and for a production run: upload, check, options, price, order.

An engineer confirms every order before production. Orders are paid by bank transfer and leave Shenzhen with DHL Express, and the order's page shows each step until delivery.

If the boards are to be assembled as well, the same upload takes your parts list and pick-and-place file.

PCB assembly

Start with your files

Ordering opens soon. Until then, send the zip, the BOM and the pick-and-place file by e-mail and an engineer answers with a price.