Ordering opens soon. Until then, write to support@uliketechnology.com and an engineer answers.

Gerber viewer

Online Gerber viewer: opening soon

Soon you drop a zip of Gerber and drill files here and see your board drawn layer by layer, with the findings of the factory's 25 checks marked on it. Until then, an engineer checks your files by e-mail.

Ordering opens soon

Send your Gerber zip, the BOM and the pick-and-place file to support@uliketechnology.com. An engineer looks at them and answers with a price.

E-mail takes attachments, so you can send the files as they are.

How to reach the factory

What to upload

A .zip with the Gerber and drill files of one board, as your design tool exports them. Exports of KiCad, Altium, Eagle and EasyEDA are recognised.

If the site cannot tell which file is which layer, it asks you and checks the board again with your answer. An archive that is not a zip is taken too, but an engineer unpacks it, so it is not drawn at once.

What you see

  • Top, bottom and inner layers

    Each side of the board as a drawing, the bottom shown as you will receive the board.

  • Layers you can switch

    Copper, pads, silkscreen and holes, each on or off.

  • What was measured

    The size from your outline, the number of copper layers and holes, the smallest track and the smallest hole.

  • Parts, if you add them

    With a parts list and a pick-and-place file, every part is drawn at its position on the board.

The 25 checks, with their findings on the board

The check runs in three levels: the package, manufacturability, and the order against the files. Every finding has a fixed id and a severity and, where something was measured, the value beside the limit.

A finding that has a place on the board is marked on the drawing, so you see where a track is too thin or a hole too close to copper. Where there is a way to fix a finding, it is named.

The check shows that the files are complete, consistent and buildable by us. It cannot show that the circuit works. An engineer confirms every order before production.

All 25 checks of the file check

From the drawing to a price

The same page carries the order form. Choose the options and the price follows, and the check runs again for what you chose: a board that passes with the standard options may need another look with a thinner board or a special process.

What works without an account

The upload, the drawing, the check report and the price all work without an account, within a daily allowance. Your files stay private: a board opened this way can be opened again only from the same browser.

An account is needed to ask an engineer and to place an order. When you sign in, the boards and quotes of that browser move into your account.

Start with your files

Ordering opens soon. Until then, send the zip, the BOM and the pick-and-place file by e-mail and an engineer answers with a price.